维宏LOGO
Search Results for

    Show / Hide Table of Contents

    NcStudio Programming Manual

    • Machining Program
      • Structure of Machining Program
      • Format of Program Block
      • Address Symbols
      • Format of Subprogram
      • Assignment Expression
      • Comments in Program
    • Funstion S, F and T
      • Spindle Function S
      • Feedrate F
      • Tool Function T
    • Miscellaneous Function M
      • M801 String Transmission between Modules
      • M802 Integer Transmission between Modules
      • M901 Direct Controling over Output Port
      • M902 Direct Setting Reference Point
    • Preparatory Function G
      • G00 Rapid Positioning
      • G01 Linear Interpolation
      • G02/G03 Circular Interpolation
      • G04 Dwell
      • G17/G18/G19 Plane Selection
      • G20/G21 or G70/G71 Input in Inch/Metric
      • G28 Automatic Returning to Reference Point
      • G40/G41/G42 Tool Radius Compensation
      • G43/G44/G49 Tool Length Compensation
      • G50/G51 Scaling Function
      • G50.1/G51.1 Mirroring Function
      • G53 Machine Coordinate System
      • G54~G59 Selection of WCS
      • G68/G69 Rotation Function
      • G90 Absolute Programming and G91 Incremental Programming
      • G92 Setting Workpiece Coordinate System
      • G921 Specifying the Workpiece Coordinates of Current Point
      • G922 Specifying the Coordinates of WCS Origin
      • G923 Setting Tool Offset
      • G992 Setting Temporary WCS
    • Canned Cycle
      • Action of Canned Cycle
      • Format of Canned Cycle
      • G73 High-speed Peck Drilling Cycle for Deep Holes
      • G74 Left Tapping Cycle
      • G76 Fine Boring Cycle
      • G80 Cancelling Canned Cycle
      • G81 Drilling Cycle
      • G82 Drilling Cycle of Dwell at the Bottom of Hole
      • G83 Peck Drilling Cycle for Deep Holes
      • G84 Tapping Cycle
      • G85 Drilling Cycle
      • G86 High-speed Drilling Cycle
      • G87 Fine Back Boring Cycle
      • G88 Boring Cycle
      • G89 Boring Cycle of Dwell at the Bottom of Hole
      • OSS (Oriented Spindle Stop)
    • Special Canned Cycle
      • G34 Circle Drilling Cycle
      • G35 Linear Drilling Cycle
      • G36 Arc Drilling Cycle
      • G37 Chessboard Drilling Cycle
    • Custom Canned Cycle
    • Other Function Commands
      • G65 Subprogram Call
      • G903 100% Feedrate Override Command
      • G904 Conditional Movement Command
      • G905 Enable Feedrate Command
      • G906 Synchronization Command
      • G907 Moving in the Shortest Path
      • G908 Force to Program in Degrees
      • G916 Writing Axis Configuration Data Command
      • G918 Clearing Latch Flag Command
      • G919 Calculating Deceleration Distance of Cross-signal Trigger Point
    • Programming Examples for Machining File
      • Programming Example 1
      • Programming Example 2
      • Programming Example 3
      • Programming Example 4
      • Programming Example 5
      • Programming Example 6
    • Appendix
      • Named Parameters
      • G Commands
      • Programming Terms
    In This Article
    Back to top Shanghai Weihong Electronic Technology Co., Ltd.