Nozzle Information Management

Configure the nozzle type and aperture for configuration when setting the layer technic and changing the nozzle.

Operation Steps:

  • View nozzle information

  1. In the function menu bar, click Maintain to open the Maintain page.

  2. In the nozzle setting area, click Nozzle Info. Management to pop up the Nozzle Info. Management dialog box.

  3. In the drop down button in the Nozzle Type area, select the nozzle type, and the corresponding nozzle information will be displayed on the left according to the nozzle type.

  • Add nozzle

  1. From the drop down button in the Nozzle Type area, select the type of nozzle you want to add.

    Note

    If there is no suitable nozzle type, you need to add a new nozzle type: Click , in the pop up Nozzle Information dialog box, fill in the nozzle shorthand and name, and click OK.

  2. Fill in the Nozzle Dia(mm) information.

  3. Click Add.

  • Delete nozzle information
  1. Select the nozzle information so that it is highlighted.
  2. Click Delete.
  • Save nozzle information

  1. Click OK to save and close the dialog.

    Note

    Since the dialog box will be closed after click OK, it is recommended to click OK after add and delete operations.

    Click the Cancel or close button if you do not want to save.