Start Point

The start point is the start point of cutting each part. Each independent graphics has one and only one start point. The setting of the start point can facilitate the planning of the path, or set the start position of the tool according to the actual situation on site.

If there is a lead line, set the start/end point of the lead line; if there is no lead line, set the start point of machining, and start machining the graphic from the selected current point.

Operation Steps:

1. Select any of the following methods to call the function of manually setting the start point:

   • In the common toolbar, click Start Point.

   • Select any object, right click to call the shortcut menu, click Lead Line → Start Point.

   • In the menu bar, click Technics → Lead Line → Set Start Point.

2. Move the mouse, left click to select the start point of the start line.

3. In the graphics, select the end point of the start line with the left click to form the start line.

4. Optional: modify start point:

• Whole moving start line: Move the mouse along the graphic, and the start line will also move along with it. Left click the graphic to select another place as the start point.

  • Reset the start line: Repeat steps 2~3.

1. Right click or press ESC key to exit the start point function.