Set Unfill / Fill

Unfill is used to preserve the outer of the closed graphics during machining. Fill is used to preserve the inner of closed graphics during processing.

Operation Steps:

1. Select closed graphics.

2. Select any of the following methods to select the Unfill/Fill command:

   • In the common toolbar, click Unfill/Fill.

   • Right click to call the shortcut menu, click Unfill/Fill.

   • In the menu bar, click Technics → Unfill/Fill.

3. Select the setting method in the submenu:

   • Select Unfill/Fill, and manually set the selected graphic as unfill or fill.

   • Select Auto Set, according to the nesting relationship of the selected graphics, it will be automatically set as unfill or fill.

After setting, you can check the unfill and fill cut properties by switching Fill Mode.