Check Statistics

It is used to generate a statistic report to show the machining results based on intersection lines, so that you can check the part number, cutting length, cutting time, piercing number, piercing time and machining costs.

Before checking statistics, ensure the following:

• There is at least one intersection line in the loaded toolpath.

  The mark name (part name) of the intersection line is set in the toolpath by default. You can click View → Show Part Mark in the menu bar to check the part mark.

  To modify the mark name (part name) of the intersection line, do the following:

  1. In the menu bar, click Edit → Part Mark, and input the mark name Pn in Part Mark dialog box. The mouse turns into .

  2. In the drawing window, select the target intersection line, and left click. Pn is set to the mark name of the selected part.

• The target toolpath has been machined.

To check statistics, do the following:

1. To open Statistic Information dialog box, do one of the following:

   • In the running report bar, click Statistic Info.

   • In the menu bar, click Machining → Statistic Information.

   

2. Check statistic information.

3. To calculate the total cost for the target machining items, check the machining items, click Charge, input related prices, and click Calculate.

4. To show the statistics in a report, check the target machining items, and click Report:

   

   The report can be exported as a PDF file.