Set Unfill or Fill

It is used to reserve a certain part of closed objects. For objects set as Unfill, the system reserves the outer part; for objects set as Fill, the system reserves the inner part.

To set unfill or fill, select closed objects, and do the following:

1. Call Unfill/Fill command:

   • In the common toolbar, click Unfill/Fill.

   • In the menu bar, click Technics → Unfill/Fill.

   • Right click on the drawing window, and click Unfill/Fill.

2. Select one of the following:

   • To manually set the selected objects as unfill/fill, select Unfill / Fill.

   • To set the selected objects as unfill by default, select Auto.

After setting unfill/fill, check unfill/fill attribute by switching to the fill mode.