Adjust the Axis Direction

This operation is used to avoid that the axis direction is opposite to the direction judged by Right Hand Rule.

To adjust the axis direction, do the following (taking X-axis as an example):

1. Check current value of parameter Axis Direction under 1.0.0 X-axis category.

2. Judge the positive direction of X-axis according to Right Hand Rule.

3. Click X+ in machine control area to move X-axis and observe its moving direction.

4. Optional: If the actual moving direction is opposite to the judged direction, modify the set value to the opposite value.

Example

Current value of parameter Axis Direction is 1. Manually move X-axis towards positive direction and find X-axis moves towards the negative direction.

Then, you need to change set value of the parameter to -1.