Set Fill or Unfill

This operation is used to reserve a certain part of closed objects. For objects set as Fill, the system reserves the inside. For objects set as Unfill, the system reserves the outside.

To set fill/unfill, do the following:

1. Select the target closed objects.

2. Do one of the following:

   • In menu bar, click Object → Unfill/Fill.
   • In drawing window, right click and select Unfill/Fill.

3. Select a setting method:

   • Fill/Unfill

     Used to manually set the selected objects as fill/unfill.

   • Auto Set

     Used to automatically set the selected objects as fill/unfill:

     • In sheet cutting configuration, set the selected objects as fill/unfill according to the nesting relationship automatically.

     • In tube cutting configuration, set the selected objects as unfill by default.

After setting fill/unfill, check fill/unfill attribute by switching to fill mode.