CCD commissioning

To make CCD ready for machining, you need to adjust the camera and do some commissiong.

Follow steps below to do the commissioning.

1. Power up and start the NC system.

2. Turn the system to Homing mode, and return all machine axes to the machine origin.

3. Turn the system to Manual mode, click Vision → CCD → Parameters → Manufacturer Param → Measure to switch to Measure interface.

4. Use the function Pick Current to decide the working plane.

   It is recommended to leave distance between the camera bottom to the workpiece surface 125mm.

   See Setting CCD Working Plane for details.

5. Adjust the camera, including the focal length, aperture, etc. to ensure the camera can get a clear sight.

6. Measure the magnification of the camera.

7. Move to the shooting position.

8. Camera shoots and gets marking points.